Operation, Finishing checklist | Desa CGEF32D, ES301, CGEF26B

INSTALLATION

Continued

CAUTION: Provide adequate clearances around the air open- ings and adequate accessibility clearances for servicing and proper operations.

Installing as Insert

Once the site has been prepared, your fire- place insert can be installed.

1.Make sure power switch is in the OFF position.

2.Plug fireplace into a 15-amp/120 volt, grounded outlet.

3.Push fireplace insert so trim is against fin- ished mantle or wall surface.

Finishing

WARNING:Controlpaneldoor on this heater cannot, in any way, be covered as it may create a fire hazard.

Combustible Finishing Material: Materials made of or surfaced with wood, compressed paper, plant fibers, plastics or any material capable of igniting and burning, whether flame proofed or not, plastered or unplastered (this includes drywall).

Noncombustible Finishing Material : Ma- terials which will not ignite and burn. Such materials are those consisting entirely of

steel, iron, brick, tile, concrete, slate, glass or plasters or combinations thereof or have a fire rating of zero.

Finishing checklist

•Power supply service must be completed prior to finishing to avoid reconstruction.

•Grills and air openings cannot be covered in any circumstances.

Note: The heater is a zero clearance fireplace and may be finished with combustible or non- combustible finishing materials.

When using paint or lacquer to finish the mantel, they must be heat resistant to prevent discoloration.

Operation

The controls (see Figure 5) are located behind hinged control panel door. If using heater, con- trol panel door will be hot during and immedi- ately after operation. Open door by pressing on right side. A spring magnet will push door forward. Pull door down to open.

1.Plug in electric fireplace.

2.Turn on lighted power switch (see Figure 5).

3.Adjust Flame/Ember/Backlight/Heater to desired settings using the control pad on fireplace (Figure 5) or remote control

(Figure 6, page 8). Figure 7, page 8, shows fireplace settings available. Default settings are circled. Press control pad or remote control buttons once and release to adjust settings.

Note: When on, ember bed will lighten and darken automatically to simulate real embers.

The heater is pre-set to the following temperatures:

High will shut off when room reaches ap- proximately 86° F (30° C).

Medium will shut off when room reaches approximately 79° F (26° C).

Low will shut off when room reaches ap- proximately 72°F (22° C).

Note: Fan on heater will continue to run for 5-7 seconds after heater has been turned off.

4.When using remote control, aim remote at sensor located in center of unit just above log set. IMPORTANT: This remote control must remain within 20 feet (6 m) of fireplace to be effective.

5.When power switch is turned off, fireplace settings go back to default (see Figure 7, page 8).

Heater Flame Ember Backlight Control Control Control Control

Heater Flame Ember Backlight

Lighted Power Switch Power

Figure 5 - Controls For Electric Fireplace

120927-54Bwww.desatech.com

CGEF32D, VEF32B, CGEF26B, ES301, VEF26B specifications

Desa CGEF26B, ES301, CGEF32D, VEF26B, and VEF32B are notable models in the heating and energy sector, each offering unique features, technologies, and characteristics tailored to meet diverse consumer needs.

The Desa CGEF26B is a modern energy-efficient heater equipped with advanced ceramic technology. This model is designed to provide sustained warmth in both residential and commercial settings. Its compact design allows for easy portability, making it ideal for personal use as well as larger spaces. The thermostat control feature ensures that the desired temperature is consistently maintained, providing comfort without excessive energy consumption. Furthermore, the heater includes safety features such as overheat protection and a tip-over switch, making it a reliable choice for households with children and pets.

The ES301 model stands out due to its dual-fuel capability, allowing users to switch between electric and propane heating sources. This versatility makes it a favored option in areas prone to power outages. Designed with a sleek aesthetic, the ES301’s modern interface is user-friendly, allowing for easy temperature adjustments and program settings. Its energy-efficient design not only reduces utility bills but also lowers the environmental impact, making it a responsible choice for eco-conscious consumers.

The CGEF32D heater offers enhanced features such as a remote control for convenience, allowing users to adjust settings from a distance. This model is particularly known for its high heating capacity, making it suitable for larger rooms or open-concept spaces. With multiple heat settings and a fan-forced distribution system, it ensures optimal warmth and comfort throughout the area. Its durable construction ensures a long lifespan and reliable performance, even under heavy usage.

The VEF26B model focuses on user safety and efficiency. It features an integrated air filter that helps maintain indoor air quality while heating. This model also includes a programmable timer, allowing users to set operational hours to align with their schedules, thus minimizing energy wastage. Its compact design makes it suitable for homes with limited space or for use in personal offices.

Lastly, the VEF32B is designed for those who require high-performance heating solutions. With an impressive BTU output, this model effectively warms larger environments quickly. It features various heating modes, enabling users to customize their experience based on specific needs. Additionally, its robust safety features ensure peace of mind during operation.

In summary, each of these models—CGEF26B, ES301, CGEF32D, VEF26B, and VEF32B—carries distinct advantages that cater to a wide range of users, combining safety, efficiency, and advanced technology to deliver optimal heating solutions.

Desa CGEF32D, ES301, CGEF26B, VEF26B Operation, Finishing checklist, Installing as Insert

Models: CGEF32D VEF32B CGEF26B ES301 VEF26B