SAFETY
Continued
14.A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint or flammable liquids or vapors are used or stored.
15.Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, elec- tric shock or injury to persons.
16.Avoid the use of an extension cord be- cause the extension cord may overheat and cause a risk of fire. However, if you have to use an extension cord, the cord should be No. 14 AWG minimum size and rated not less than 1875 WATTS.
17.Always use ground fault protection where required by electrical codes.
18.Always disconnect power before perform- ing any cleaning, maintenance or reloca- tion of heater.
19.To prevent a possible fire, do not burn wood or other materials in this heater.
20.To prevent electric shock or fire, always use a certified electrician should new circuits or outlets be required.
21.When transporting or storing heater, keep in a dry place.
22.Control panel door gets hot during heater operation. Open door by pressing on right corner. A spring magnet will disengage. Pull door down to open.
Listing Approvals
This heater has been tested in accordance with the CSA Standards for fixed and loca-
If you need assistance during installation, please contact your local dealer or the DESA Heating Products Technical Services Depart- ment at
Please have the Distributor’s model and serial numbers when you call.
Description: | 26" and 32" Fireplace/Inserts |
Voltage: | 120 |
Watts: | 1500 |
Amps: | 15 Amp |
| Grounded Circuit |
Note: This heater must be electrically wired and grounded in accordance with local codes or, in the absence of local codes, with National Electric Code ANSI/NFPA
Product Dimensions
9.25" | 10" |
26" | 33.25" |
29.25" | 37.5" |
27" | 34" |
26" Models | 32" Models |