| Product Identification |
| ||
Control | Handle | Remote Hide Flame Control | ||
Magnetic | Ember Control | |||
Panel Door |
| |||
|
| |||
|
| Catch |
|
Heat Vents |
| Backlight |
| Control | |
(Behind Door) |
|
|
Front Glass |
|
|
Heater | Flame | Ember Backlight |
|
| Power |
Back Glass |
| ON/OFF |
Heater |
| |
| Power | |
Control |
| Button |
Remote |
|
|
Log Set
Figure 2 - Product Identification
Unpacking and Testing
Carefully remove unit from box. Prior to permanently installing unit, test to make sure unit operates properly. To do this, plug unit's power supply cord into a conveniently located
CAUTION; The unit's power supply cord must be connected to a properly grounded and pro-
required by the electrical code.
WARNING: Do not operate the unit if it is damaged or has malfunctioned.Ifyoususpectthe unit is damaged, return the unit to an authorized service facility for examination, electrical or me- chanical adjustment or repair.
Locating Fireplace
WARNING: Due to high tem-
peratures, this heater should
be located out of traffic. Keep
combustible materials such
as furniture, pillows, bedding, papers, clothes and curtains at
least 3 feet (0.9 m) from the front of the heater.
WARNING: Never locate this heaterwhereitmayfallintoabath-
tub or other water container.
NOTICE:Minimumandmaximum clearancesmustbemaintainedat alltimes.Illustrationsthroughout these instructions reflect typical installations and are for design purposes only. Actual installa- tions may vary slightly due to individual preferences.
WARNING: To prevent contact with sagging or loose insulation, the heater must not be installed against vapor barrier or exposed insulation. Localized overheating could occur and a fire could result.
www.desatech.com120927-54B