Briggs & Stratton LT-200 manual Setup Adjustment Instructions

Setup

& Adjustment Instructions

LT-200 Series Tractors and Mowers

Mfg. No. Description

Tractors & Mower Combinations

2690437 LT-200, 20HP & 44” Mower Deck

Attention Setup Personal:

The safety warnings provided in this guide and in the operator's manual included with the unit contain important information that must be obeyed when assembling, setting-up, operating, servicing,

transporting, or storing the unit.

These warnings are highlighted by the safety alert triangle symbol shown above, which signifies that an important safety message is being provided.

You must read, understand, and follow these warnings and instructions, and use safe shop and work practices at all times while working on or around this unit and all other outdoor power equipment.

Sections and items denoted by the Setup symbol provide the information necessary to fully assemble, test, and prepare the units described above for delivery to your customers.

Additional information concerning functional tests, general adjustment procedures, and the location of normal lubrication points are included in these instructions.

TABLE OF CONTENTS:
SAFETY RULES	2
SETUP PROCEDURES
Quick Setup List	3
Uncrating	4
Battery Charging & Installation	4
Check Fluid levels	5
Check Transmission Oil Level	5
Fill and Check Engine Oil	5
Perform Safety Checks	6
Functional Tests	6
Mower Blade Stopping Check	6
Seat Switch Connection	6
Safety Interlock System	6
Torque Mower Blades	7
Burnishing the Electric PTO Clutch	7
Reduce and Check Tire Pressure	7
Lubrication	8
Hourmeter	11
Mower Adjustments & Assembly	10
Mower Deck Removal & Installation	10
Side-to-Side Leveling	11
Front-to-Back Leveling	11
ADJUSTMENT PROCEDURES
Adjust Gauge Wheels	12
Seat Slide Adjustment	12
Electric PTO Clutch Adjustment	13
SERVICE PROCEDURES
Mower Belt Replacement	14

Form No. 1734713-00

1/2006 1 TP 300-4517-00-RG-SMAN