Polycom SIP 2.2.2 manual Uploaded if no new events have, Been logged since the last upload

Administrator’s Guide SoundPoint IP / SoundStation IP

	Permitted
Attribute	Values	Default	Interpretation
log.render.file.size	positive	16	Maximum local application log file
	integer, 1 to		size in Kbytes. When this size is
	179.5		exceeded, the file is uploaded to
			the boot server and the local copy
			is erased.
log.render.file.upload.period	positive	172800	Time in seconds between log file
	integer		uploads to the boot server.
			Note: The log file will not be
			uploaded if no new events have
			been logged since the last upload.
log.render.file.upload.append	0, 1	1	If set to 1, use append mode when
			uploading log files to server.
			Note: HTTP and TFTP don’t
			support append mode unless the
			server is set up for this.
log.render.file.upload.append.sizeLimit	positive	512	Maximum log file size on boot
	integer		server in Kbytes.
log.render.file.upload.append.limitMode	delete, stop	delete	Behavior when server log file has
			reached its limit.
			delete=delete file and start over
			stop=stop appending to file

Scheduled Logging Parameters <sched/>

The phone can be configured to schedule certain advanced logging tasks on a periodic basis. These attributes should be set in consultation with Polycom Technical Support. Each scheduled log task is controlled by a unique attribute set starting with log.sched.x where x identifies the task.

Attribute	Permitted	Interpretation
	Values
log.sched.x.name	alphanumeric	Name of an internal system command to be periodically executed.
	string	To be supplied by Polycom.
log.sched.x.level	0-5	Event class to assign to the log events generated by this command.
		This needs to be the same or higher than log.level.change.slog for
		these events to appear in the log.
log.sched.x.period	positive	Seconds between each command execution. 0=run once
	integer

A - 72