Refresh parameter will be respected only | Polycom SIP 2.2.2

Administrator’s Guide SoundPoint IP / SoundStation IP

Idle Display <idleDisplay/>

The Microbrowser can be used to create a display that will be part of the phone’s idle display. These settings control the home page and the refresh rate.

Attribute	Permitted Values	Default	Interpretation

mb.idleDisplay.home	Null or any fully	Null	URL used for Microbrowser idle display home
	formed valid HTTP		page. For example:
	URL. Length up to		http://www.example.com/xhtml/frontpage.cgi?pa
	255 characters.		ge=home. If empty, there will be no
			Microbrowser idle display feature. Note that the
			Microbrowser idle display will displace the idle
			display indicator (refer to
			ind.idleDisplay.enabled in Indicators <ind/>
			on page A-65).

mb.idleDisplay.refresh	0 or an integer > 5	0	The period in seconds between refreshes of the
			idle display Microbrowser's content. If set to 0,
			the idle display Microbrowser is not refreshed.
			The minimum refresh period is 5 seconds
			(values from 1 to 4 are ignored, and 5 is used).
			Note: If an HTTP Refresh header is detected, it
			will be respected, even if this parameter is set to
			0. The refresh parameter will be respected only
			in the event that a refresh fails. Once a refresh is
			successful, the value in the HTTP refresh
			header, if available, will be used.

A - 80

Image 192

Polycom SIP 2.2.2 manual Will be respected, even if this parameter is set to, Refresh parameter will be respected only

Contents

SIP Disclaimer Copyright Notice About This Guide Administrator’s Guide SoundPoint IP / SoundStation IP Contents Administrator’s Guide SoundPoint IP / SoundStation IP Troubleshooting Your SoundPoint IP / SoundStation IP Phones Viii Contents Administrator’s Guide SoundPoint IP / SoundStation IP SoundPoint IP Desktop Phones IP 320/330 IP 600/601SoundStation IP Conference Phone SoundPoint IP Desktop Phones Introducing the SoundPoint IP / SoundStation IP Family SoundStation IP Conference Phone SoundPoint IP 600/601 Key Features of Your SoundPoint IP / SoundStation IP Phones Currently supported conference phone is SoundStation IP Administrator’s Guide SoundPoint IP / SoundStation IP Overview Where SoundPoint IP / SoundStation IP Phones Fit SoundPoint IP / SoundStation IP Phones on BootROM Session Initiation Protocol Application Architecture Application Configuration Master Configuration Files Application Configuration Files Application Configuration Files Resource Files Available Features Ring tones Synthesized tones Contact directories Overview Microsoft Live Communications Server Overview IP Type-of-Service-Allows for the setting of TOS settings Setting up Your System Configured in your network Setting Up the Network Dhcp or Manual TCP/IP Setup For more information on Dhcp options, go to Supported Provisioning Protocols FTP Tftp Http Https Modifying the Network Configuration Certificate Authority List on page C-1Main Menu Dhcp Menu Server Menu Ethernet Menu Syslog Menu EM Power Name Possible Values Description Dhcp ClientDhcp Menu Phone IP Address Possible Name Values Description Menu Menu Name Possible Values DescriptionOr later. Passive FTP is still supported Password these characters if they are correctly escaped Using the method specified in RFCPassword, this will be ignored This will be ignored Ethernet menu CDP Setting Up the Boot Server TLS=3 Information, contact your Certified Polycom Reseller Create account and home directoryEach phone may open multiple connections to the server These permissions, but will not be able to upload files Deploying Phones From the Boot Server You must decide on a boot server security policy Configuration on page A-4 SIP/ on page A-10 PhoneMACaddress.cfg Upgrading SIP Application Supporting SoundPoint IP and SoundStation IP Phones Supporting SoundPoint IP 300 and 500 Phones To upgrade your SIP application Cfg file can be used for all phones in a deployment Setting Up Basic Features Configuring SoundPoint IP / SoundStation IP Phones LocallyThis chapter also provides instructions on Administrator’s Guide SoundPoint IP / SoundStation IP Call Timer Call LogCall Waiting Called Party Identification Calling Party IdentificationMissed Call Notification Context Sensitive Volume Control Central boot serverConnected Party Identification Customizable Audio Sound Effects Message Waiting Indication Distinctive Incoming Call TreatmentMessages and voice messages are waiting Distinctive Ringing Distinctive Call WaitingAddress-directory Xml Local Do Not Disturb Handset, Headset, and Speakerphone Local Contact Directory Boot server Address-directory DirectOry.xml Xml LnSmith/ln FnBill/fn Ct1003/ct Sd3/sd Rt3/rt Ad0/ad DirectoryElement Permitted Values Interpretation UTF-8’s variable length encoding Local Digit Map Auto-reject Microphone Mute Soft Key Activated User InterfaceSpeed Dial Time and Date Display Idle Display Animation Ethernet Switch IP330/, IP400/, IP500/, IP600/, IP4000/ on Automatic Off-Hook Call Placement Call Hold Call Transfer Local / Centralized Conferencing Call Forward Directed Call Pick-Up Setting Up Advanced Features Group Call Pick-UpCall Park/Retrieve Last Call Return Configurable Feature Keys Feature Key Layouts on page C-10 Multiple Line Keys per Registration Multiple Call Appearances Shared Call Appearances Bridged Line Appearance Refer to Bridged Line Appearance Signaling on page B-10 Busy Lamp Field Customizable Fonts and Indicators Central bootInstant Messaging Attendant.uri SoundStation IP 4000’s higher resolution display Multilingual User Interface Downloadable Fonts Synthesized Call Progress TonesMicrobrowser Real-Time Transport Protocol Ports Network Address Translation Voice Mail Integration Multiple Registrations Server server/ on page A-7 Feature depends on support from a SIP server Automatic Call DistributionDepends on support from a SIP server Server Redundancy For Outgoing Calls Invite Fallback Phone Configuration Reg.1.server.1.address=voipserver.serviceprovider.com Presence Phone Operation for Registration Microsoft Live Communications Server 2005 Integration Masking, the automatic behavior Configuration File Example Refer to Roaming Buddies roamingbuddies/ on page A-99 Refer to Roaming Privacy roamingprivacy/ on page A-99 Set reg.x.auth.password to the LCS password Set the reg.x.server.y.address to the LCS server nameLocate the roamingprivacy attribute Setting Up Audio Features Low-Delay Audio Packet TransmissionJitter Buffer and Packet Error Concealment Voice Activity Detection Dtmf Tone GenerationNegative audio consequences Acoustic Echo Cancellation Dtmf Event RTP Payload Audio Codecs Following table summarizes the phone’s audio codec supportEffective IP Type-of-Service Background Noise SuppressionComfort Noise Fill Automatic Gain Control Setting Up Security Features Ieee 802.1p/Q Local User and Administrator Privilege Levels Configuration changes can performed locallyCustom Certificates Incoming Signaling Validation Configuration File EncryptionDevice.cfg Configuring SoundPoint IP / SoundStation IP Phones Locally Passwords Troubleshooting Your SoundPoint IP / SoundStation IP Phones Error Messages BootROM Error Messages Application Error Messages Status Menu Log Files Application Logging Options Scheduled Logging Reading a Boot Log Following figure shows a portion of a boot log file Reading an Application Log Following figure shows a portion of an application log file Power and Startup Symptom Problem Corrective Action Controls Access to Screens and Systems Calling Displays Phone on page C-9 Audio Upgrading Configuration Files Master Configuration Files One will cause a reboot loop Application Configuration CONFIGFILES=phone1MACADDRESS.cfg, sip.cfg MISCFILES= Configuration Files This configuration attribute is defined as follows Protocol volpProtMicrobrowser mb USB Port usb This attribute includes If voIpProt.server.x.address is a VoIpProt.server.x.transport is set toIf voIpProt.server.x.transport is set to If voIpProt.server.x.address is an IP VoIpProt.server.x.address is an IP VoIpProt.SIP.lcs Parameter if set to 1 when the parameter To 1 default is Permitted Attribute Values Default Interpretation This attribute also includes Reg.x.auth.optimizedInFailover takes Outbound Proxy outboundProxy Due to the additional signaling required Alert Information alertInfoRequest Validation requestValidation May have a negative performance impact Conference Setup conference Attribute Permitted Default Interpretation ValuesSpecial Events specialEvent Dial Plan dialplan Dialplan.applyToCallListDialConsidered a dial from directory This attributes also includes Digit Map digitmap Routing routing Attribute Permitted Values Default Interpretation Server server Emergency emergency Localization lcl Server serverEmergency emergency Multilingual ml Date and Time datetime Attribute Permitted Values Interpretation Lcl.ml.lang.menu.1Lcl.ml.lang.menu.2 Lcl.ml.lang.menu.3 Lcl.datetime.date.longFormat Lcl.datetime.date.dateTop +FF00 U+FFFF User Preferences up Permitted Attribute Values Interpretation Tones tones Dual Tone Multi-Frequency Dtmf Chord-Sets chordOnIntensity, it will be replaced with OnIntensity value Only be enabled when tone.dtmf.viaRtp is Disabled Be enabled when tone.dtmf.viaRtp is Sampled Audio for Sound Effects saf Ringer, or misc Sound Effects se Following table, x is the sampled audio file numberWave file format Tftp//host/pathnamefilename, for example Patterns pat Ring type rt Instruction Meaning Example Miscellaneous Patterns Call Progress PatternsCall progress Use within phone Pattern number Ringer pattern number Default description Ringer PatternsCall progress Pattern number Use within phone Miscellaneous Patterns Miscellaneous Pattern number Use within phone Sequential Patterns on page A-31 Voice Settings voice Following voice codecs are supported These codecs include Codec Preferences codecPref Codec Profiles audioProfileCodec Preferences codecPref Codec Profiles audioProfile Attribute Default Attribute Default Attribute Default Acoustic Echo Cancellation aec Acoustic Echo Suppression aes Background Noise Suppression ns Feature Attribute Default Transmit Equalization txEq Attribute Default Quality of Service QOS Following settings control the 802.1p/Q userpriority fieldIf voice.vadEnable is set to 0, add attribute line Ethernet Ieee 802.1p/Q ethernet IP TOS IP These parameters apply to RTP packets Call Control callControlOther other RTP rtp Call Control callControl RTP rtp Basic TCP/IP Tcpip Qos.ip.callControl… Attribute Permitted Default Values Permitted Attribute Values Default Interpretation If fixedDayEnable is set to Start.dayOfWeekStart.date is ignored Stop.dayOfWeek Must be enabled for this to work Web Server httpdRTP rtp TcpIpApp.port.rtp.filterByIp Call Handling Configuration call Configuration cfg Take precedence over this feature if enabled. For More information, refer to No AnswerReg.x.callsPerLineKey. Refer to Registration Case the phone may select a different available Shared Calls shared Hold, Local Reminder hold/localReminder If call.stickyAutoLineSeize is set to 1, this Directory dir IP 4000 phone. For other phones a quick pressRelease of the line key will resume a call Whereas pressing and holding down the line Platform, this value is internally Replaced by 2X the value Presence pres Fonts font SoundPoint IP 320, 330, 430, 500 SoundPoint IP 550, 600, 601, IP330 font IP330 This configuration attribute is defined as follows Keys key Following table lists the functions that are available Functions Indicators ind Following indicators are used by the phoneBitmaps bitmap Platform IP300/, IP 330/, IP400 Attribute Permitted Interpretation Values LEDs led Following table, x is the LED number Event Logging log Level Interpretation Three formats are available for the event timestamp Two types of logging are supportedType Example Log.render.level maps to You do not change this value Support append mode unless Server is set up for thisUploaded if no new events have Been logged since the last upload Encryption encryption Password Lengths pwd/length Security sec License license Provisioning prov You do not change thesePlatform InFreeSpace is internally Delay delay RAM Disk ramdiskRequest request Value Feature feature Resource res Finder finder Quotas quotas Microbrowser mb Internally replaced by 2X the value Will be respected, even if this parameter is set to Refresh parameter will be respected onlyEvent that a refresh fails. Once a refresh is Successful, the value in the Http refresh Function is selected Detrimental effect on performance of the phone Per-Phone Configuration These settings control the bulk drive or memory stickUSB Port usb Bulk Drive bulkDrive Registration reg Is non-Null, all of the reg.x.server.y.xxx Parameters will override the parametersSpecified in sip.cfg in Server server/ on A-7 Refer to Call Handling Configuration call IP 300 and 500 phones If reg.x.serverFeatureControl.cf is not Calls call Do Not Disturb donotdisturb If call.missedCallTracking.x.enabled is Forwarding is enabled, this Parameter is enabledDiversion divert Calls can be automatically diverted when the phone is busy Divert.x.contact will be Enabled, this parameter is Server-base call forwarding isDialplan.x.digitmap is not Dialplan.x.applyToUserDial When present, and if Digit Map digitmap/ on Message Waiting Indicator mwi Messaging msg Network Address Translation nat VoIpProt.local.signalPort in sip.cfg Attendant attendant Roaming Buddies roamingbuddies Roaming Privacy roamingprivacyValue 0 if the call server is Microsoft Live Communications Server Flash Parameter Configuration Enabled This flash attributes are defined as followsFor example, if device.net.ipAddress.set = Server address is preserved Refer to Basic Logging level/change/ Session Initiation Protocol SIP RFC and Internet Draft Support Request Support Following SIP request messages are supportedMethod Supported Header Support Following SIP request headers are supportedHeader Supported Header Supported Response Support Following SIP responses are supportedResponse Supported 3xx Responses Redirection 5xx Responses Server Failure Hold Implementation Reliability of Provisional ResponsesTransfer Third Party Call Control Shared Call Appearance Signaling Bridged Line Appearance Signaling Miscellaneous Administrative Tasks Trusted Certificate Authority List Administrator’s Guide SoundPoint IP / SoundStation IP Encrypting Configuration Files Boot server management easier It can decrypt the files that were encrypted on the server.Chaining CBC mode. An example key would look like this Changed at regular intervals to enhance security Adding a Background Logo Changing the Key on the Phone Model Width Height Color Depth RGB ValuesColor RGB Values Decimal Hexadecimal BootROM/SIP Application Dependencies Model BootROM SIP Application Migration Dependencies Multiple Key Combinations Default Feature Key Layouts SoundPoint IP SoundPoint IP SoundPoint IP 550/600/601/650 SoundStation IPKey IP 550 330 601 Function IP 550 Key 330 601 Function Assigning a Vlan ID Using Dhcp VLAN-A=10 VLAN-A=0x0a VLAN-A=012 Parsing Vendor ID Information End of sub-options Administrator’s Guide SoundPoint IP / SoundStation IP Third Party Software Administrator’s Guide SoundPoint IP / SoundStation IP Zlib Copyright and Permission Notice Third Party Software Administrator’s Guide SoundPoint IP / SoundStation IP Index Dhcp Secondary server 3-3DHCP Inform IP TOS A-48 Administrator’s Guide SoundPoint IP / SoundStation IP SIP Administrator’s Guide SoundPoint IP / SoundStation IP New or Changed Features Ethernet Menu Distribution Zip File LCD Backlight