Polycom SIP 2.2.2 Distinctive Ringing, Distinctive Call Waiting, Address-directory, Xml Local

Configuring Your System

Distinctive Ringing

There are three options for distinctive ringing:

1.The user can select the ring type for each line. This option has the lowest priority.

2.The ring type for specific callers can be assigned in the contact directory. For more information, refer to Distinctive Incoming Call Treatment, the previous section. This option has a higher priority than option 1 and a lower priority than option 3.

3.The voIpProt.SIP.alertInfo.x.value and voIpProt.SIP.alertInfo.x.class fields can be used to map calls to specific ring types. This option has the highest priority.

Configuration changes can performed centrally at the boot server or locally:

Central	Configuration file:	Specify the mapping of Alert-Info strings to ring types.
(boot server)	sip.cfg	•	For more information, refer to Alert Information <alertInfo/> on
			page A-14.
	Configuration file:	Specify the ring type to be used for each line.
	phone1.cfg	•	For more information, refer to Registration <reg/> on page A-84.
	XML File: <Ethernet	This file can be created manually using an XML editor.
	address>-directory.	• For more information, refer to Local Contact Directory File Format
	xml		on page 4-10.
Local	Local Phone User	The user can edit the ring types selected for each line under the
	Interface	Settings menu. The user can also edit the directory contents.
		Changes are saved to local flash and backed up to <Ethernet
		address>-phone.cfgon the boot server. Changes will permanently
		override global settings unless deleted through the Reset Local
		Config menu selection and the <Ethernet address>-phone.cfgis
		removed from the boot server.

Distinctive Call Waiting

The voIpProt.SIP.alertInfo.x.value and voIpProt.SIP.alertInfo.x.class fields can be used to map calls to distinct call waiting types, currently limited to two styles.

Configuration changes can performed centrally at the boot server:

Central (boot server)

Configuration file: sip.cfg

Specify the mapping of Alert-Info strings to call waiting types.

•For more information, refer to Alert Information <alertInfo/> on page A-14.

4 - 7