Polycom SIP 2.2.2 manual Name Possible Values Description Dhcp Client, Dhcp Menu, Phone IP Address

Administrator’s Guide SoundPoint IP / SoundStation IP

Main Menu

The following configuration parameters can be modified on the main setup menu:

Name	Possible Values	Description
DHCP Client	Enabled, Disabled	If enabled, DHCP will be used to obtain the parameters
		discussed in DHCP or Manual TCP/IP Setup on page
		3-2.
DHCP Menu		Refer to DHCP Menu on page 3-7.
		Note: Disabled when DHCP client is disabled.
Phone IP Address	dotted-decimal IP address	Phone’s IP address.
		Note: Disabled when DHCP client is enabled.
Subnet Mask	dotted-decimal subnet	Phone’s subnet mask.
	mask	Note: Disabled when DHCP client is enabled.
IP Gateway	dotted-decimal IP address	Phone’s default router.
Server Menu		Refer to Server Menu on page 3-9.
SNTP Address	dotted-decimal IP address	Simple Network Time Protocol (SNTP) server from
	OR	which the phone will obtain the current time.
	domain name string
GMT Offset	-13 through +12	Offset of the local time zone from Greenwich Mean
		Time (GMT) in half hour increments.
DNS Server	dotted-decimal IP address	Primary server to which the phone directs Domain
		Name System (DNS) queries.
DNS Alternate Server	dotted-decimal IP address	Secondary server to which the phone directs Domain
		Name System queries.
DNS Domain	domain name string	Phone’s DNS domain.
Ethernet		Refer to Ethernet Menu on page 3-11.
EM Power	Enabled, Disabled	This parameter is relevant if the phone gets Power over
		Ethernet (PoE). If enabled, the phone will set power
		requirements in CDP to 12W so that up to three
		Expansion Modules (EM) can be powered. If disabled,
		the phone will set power requirements in CDP to 5W
		which means no Expansion Modules can be powered (it
		will not work).
Syslog		Refer to Syslog Menu on page 3-11.

3 - 6