Polycom SIP 2.2.2 manual Possible Name Values Description

	Setting up Your System
Note
	A parameter value of “???” indicates that the parameter has not yet been set and
	saved in the phone’s configuration. Any such parameter should have its value set
	before continuing.
	The EM Power parameter is only available on SoundPoint IP 601 and 650 phones.
Note
	To switch the text entry mode on the SoundPoint IP 330/320, press the #. You may
	want to use URL or IP address modes when entering server addresses.

DHCP Menu

The DHCP menu is accessible only when the DHCP client is enabled. The following DHCP configuration parameters can be modified on the DHCP menu:

	Possible
Name	Values	Description
Timeout	1 through 600	Number of seconds the phone waits for secondary DHCP Offer
		messages before selecting an offer.
Boot Server	0=Option 66	The phone will look for option number 66 (string type) in the
		response received from the DHCP server. The DHCP server
		should send address information in option 66 that matches one
		of the formats described for Server Address in the following
		section, Server Menu. If the DHCP server sends nothing, the
		phone sends out a DHCP INFORM query and the following
		scenarios are possible:
		• If no alternate DHCP server responds:
		- The INFORM query process will retry and eventually time
		out.
		- The boot server value stored in flash will be used.
		• A single alternate DHCP server responds. This is
		functionally equivalent to the scenario where the primary
		DHCP server responds with a valid boot server value.

3 - 7