Polycom SIP 2.2.2 manual RAM Disk ramdisk, Request request, Delay delay, Value

Administrator’s Guide SoundPoint IP / SoundStation IP

RAM Disk <ramdisk/>

This attribute’s settings control the phone’s internal RAM disk feature.

Polycom recommends that you do not change these values.

Attribute	Permitted	Default	Interpretation
	Values
ramdisk.enable	0, 1	1	If set to 1, RAM disk will be available. The RAM
			disk is used to cache downloaded wave files, and
			other resources for the user interface.
ramdisk.bytesPerBlock	0, 32, 33, ...,	0	These three parameters use internal defaults
	1024		when value is set to 0.
			Note: For the SoundPoint IP 650 platform,
ramdisk.blocksPerTrack	0, 1, 2, ...,	0
			ramdisk.bytesPerBlock is internally replaced by 2X
	65536
			the value.
ramdisk.nBlocks	0, 1, 2, ...,	4096
	65536
ramdisk.minsize	50 to 16384	50	Smallest size in Kbytes of RAM disk to create
			before returning an error. RAM disk size is variable
			depending on the amount of device memory.
ramdisk.minfree	512 to 16384	3072	Minimum amount of free space that must be left
			after the RAM disk has been created. The RAM
			disk’s size will be reduced as necessary in order to
			leave this amount of free RAM.

Request <request/>

This attribute includes:

•Delay <delay/>

A - 76