Polycom SIP 2.2.2 manual Message Waiting Indication, Distinctive Incoming Call Treatment

Administrator’s Guide SoundPoint IP / SoundStation IP

	Note		L16/16000 is not supported on SoundPoint IP 301 and SoundStation IP 4000
			phones.
	Note
			The alternate sampled audio sound effect files must be present on the boot server
			or the Internet for downloading at boot time.
			Configuration changes can performed centrally at the boot server or locally:
Central		Configuration File:		Specify patterns used for sound effects and the individual tones or
(boot server)		sip.cfg		sampled audio files used within them.
				• For more information, refer to Sampled Audio for Sound Effects
				<saf/> on page A-27or Sound Effects <se/> on page A-28.
Local		Web Server		Specify sampled audio wave files to replace the built-in defaults.
		(if enabled)		Navigate to http://<phoneIPAddress>/coreConf.htm#sa
				Changes are saved to local flash and backed up to <Ethernet
				address>-phone.cfgon the boot server. Changes will permanently
				override global settings unless deleted through the Reset Local
				Config menu selection and the <Ethernet address>-phone.cfgis
				removed from the boot server.
Message Waiting Indication
			The phone will flash a message-waiting indicator (MWI) LED when instant
			messages and voice messages are waiting.
			Configuration changes can performed centrally at the boot server:
Central		Configuration file:		Specify per-registration whether the MWI LED is enabled or disabled.
(boot server)		phone1.cfg		• For more information, refer to Message Waiting Indicator <mwi/>
				on page A-97.
				Specify whether MWI notification is displayed for registration x
				(pre-SIP 2.1 behavior is enabled).
				• For more information, refer to User Preferences <up/> on page
				A-23.

Distinctive Incoming Call Treatment

The phone can automatically apply distinctive treatment to calls containing specific attributes. The distinctive treatment that can be applied includes customizable alerting sound effects and automatic call diversion or rejection. Call attributes that can trigger distinctive treatment include the calling party name or SIP contact (number or URL format).

For related configuration changes, refer to Local Contact Directory on page 4-9.

4 - 6