Polycom SIP 2.2.2 Application Configuration, CONFIGFILES=phone1MACADDRESS.cfg, sip.cfg MISCFILES=

Administrator’s Guide SoundPoint IP / SoundStation IP

CONFIG_FILES=”phone1[MACADDRESS].cfg, sip.cfg” MISC_FILES=””

LOG FILE DIRECTORY=”” OVERRIDES_DIRECTORY=””

CONTACTS_DIRECTORY=”” LICENSE_DIRECTORY=””/>

If you have a requirement for separate application loads on different phones on the same boot server, you can modify the application that is loaded when each phone reboots. An example is below:

<?xml version=”1.0” standalone=”yes”?>

<!-- Default Master SIP Configuration File -->

<!-- edit and rename this file to <Ethernet-address>.cfg for each phone. -->

<!-- $RCSfile: 000000000000.cfg,v $ $Revision:$ -->

<APPLICATION APP_FILE_PATH=”sip[PHONE_PART_NUMBER].ld” CONFIG_FILES=”phone1.cfg, sip.cfg” MISC_FILES=””

LOG FILE DIRECTORY=”” OVERRIDES_DIRECTORY=”” CONTACTS_DIRECTORY=”” LICENSE_DIRECTORY=””/>

You can also use the substitution strings PHONE_MODEL,

PHONE_PART_NUMBER, and PHONE_MAC_ADDRESS in the master configuration file.

You can also direct phone upgrades to a software image and configuration files based on the phone model number and part number. All XML attributes can be modified in this manner. An example is below:

<?xml version=”1.0” standalone=”yes”?>

<!-- Default Master SIP Configuration File -->

<!-- edit and rename this file to <Ethernet-address>.cfg for each phone. -->

<!-- $RCSfile: 000000000000.cfg,v $ $Revision:$ --> <APPLICATION APP_FILE_PATH=”sip.ld” CONFIG_FILES=”phone1.cfg, sip.cfg” MISC_FILES=”” LOG_FILE_DIRECTORY=””

OVERRIDES_DIRECTORY=””

CONTACTS_DIRECTORY=”” LICENSE_DIRECTORY=”” APP_FILE_PATH_SPIP330=”SPIP330.sip.ld” CONFIG_FILES_SPIP330=”phone1_SPIP330.cfg, sip_SPIP330.cfg” APP_FILE_PATH_SPIP501=”SPIP501.sip.ld” CONFIG_FILES_SPIP501=”phone1_SPIP501.cfg, sip_SPIP501.cfg” />

For more information, refer to “Technical Bulletin 35361: Overriding

Parameters in Master Configuration File on SoundPoint IP Phones“ at

http://www.polycom.com/support/voice/.

Application Configuration

The configuration file sip.cfg contains SIP protocol and core configuration settings that would typically apply to an entire installation and must be set before the phones will be operational, unless changed through the local web

A - 4