Polycom SIP 2.2.2 manual Shared Calls shared Hold, Local Reminder hold/localReminder

			Configuration Files
	Permitted
Attribute	Values	Default	Interpretation
call.stickyAutoLineSeize.onHook	Null, 0, 1	Null	If call.stickyAutoLineSeize is set to 1, this
Dialing			parameter has no effect. The regular
			stickyAutoLineSeize behavior is followed.
			If call.stickyAutoLineSeize is set to 0 or Null
			and this parameter is set to 1, this overrides the
			stickyAutoLineSeize behavior for hot dial only.
			(Any new call scenario seizes the next available
			line.)
			If call.stickyAutoLineSeize is set to 0 or Null
			and this parameter is set to 0 or Null, there is no
			difference between hot dial and new call
			scenarios.
			Note: A hot dial occurs on the line which is
			currently in the call appearance. Any new call
			scenario seizes the next available line.
call.transfer.blindPreferred	0,1	Null	If set to 1, the Blind soft key appears as a
			transfer type.
			If set to 0 or Null, the Normal soft key appears.
			Note: This parameter is supported on the
			SoundPoint IP 330/320 only.

This attribute also includes:

•Shared Calls <shared/>

•Hold, Local Reminder <hold/><localReminder/>

Shared Calls <shared/>

This configuration attribute is defined as follows:

Attribute	Permitted	Default	Interpretation
	Values
call.shared.disableDivert	0, 1	1	If set to 1, disable diversion feature for shared
			lines.
			Note: This feature is disabled on most call
			servers.
call.shared.seizeFailReorder	0, 1	1	If set to 1, play re-order tone locally on shared
			line seize failure.

A - 57