Polycom SIP 2.2.2 manual Multiple Registrations, Phone1.cfg

		Configuring Your System
	the SoundPoint IP 430, 500, 501, 550, 600, 601, and 650). A message-waiting
	signal from a voice mail server will trigger the message-waiting indicator to
	flash.
	Configuration changes can performed centrally at the boot server or locally:
Central	Configuration file:	For one-touch voice mail access, enable the “one-touch voice mail”
(boot server)	sip.cfg	user preference.
		• For more information, refer to User Preferences <up/> on page
		A-23.
	Configuration file:	For one-touch voice mail access, bypass instant messages to
	phone1.cfg	remove the step of selecting between instant messages and voice
		mail after pressing the Messages key on the SoundPoint IP 430, 500,
		501, 550, 600, 601, and 650 (instant messages are still accessible
		from the Main Menu).
		On a per-registration basis, specify a subscribe contact for solicited
		NOTIFY applications, a callback mode (self call-back or another
		contact), and the contact to call when the user accesses voice mail.
		• For more information, refer to Messaging <msg/> on page A-96.
Local	Web Server	For one-touch voice mail access, enable the “one-touch voice mail”
	(if enabled)	user preference and bypass instant messages to remove the step of
		selecting between instant messages and voice mail after pressing the
		Messages key on the SoundPoint IP 430, 500, 501, 550, 600, 601,
		and 650 (instant messages are still accessible from the Main Menu).
		Navigate to http://<phoneIPAddress>/coreConf.htm#us
		On a per-registration basis, specify a subscribe contact for solicited
		NOTIFY applications, a callback mode (self call-back or another
		contact) to call when the user accesses voice mail.
		Navigate to http://<phoneIPAddress>/reg.htm
		Changes are saved to local flash and backed up to <Ethernet
		address>-phone.cfgon the boot server. Changes will permanently
		override global settings unless deleted through the Reset Local
		Config menu selection and the <Ethernet address>-phone.cfg is
		removed from the boot server.

Multiple Registrations

The SoundPoint IP 301, 320, 330, and 430 support a maximum of two registrations, the SoundPoint IP 501 supports three, the SoundPoint IP 550 supports four, and the SoundPoint IP 600, 601, and 650 support 6. Up to three SoundPoint IP Expansion Modules can be added to a single host SoundPoint IP 601 and 650 phone increasing the total number of buttons to 12 registrations on the IP 601 and 34 registrations on the IP 650. The SoundStation IP 4000 supports a single registration.

Each registration can be mapped to one or more line keys (a line key can be used for only one registration). The user can select which registration to use for outgoing calls or which to use when initiating new instant message dialogs.

4 - 31