Polycom SIP 2.2.2 manual Platform, this value is internally, Replaced by 2X the value

Configuration Files

When the volatile storage option is enabled, ensure that a properly configured boot server that allows uploads is available to store a back-up copy of the directory or its contents will be lost when the phone reboots or loses power.

	Permitted
Attribute	Values	Default	Interpretation
dir.local.volatile.2meg	0, 1	0	Attribute applies to platforms with 2
			Mbytes of flash memory.
			If set to 1, use volatile storage for
			phone-resident copy of the directory
			to allow for larger size.
dir.local.nonVolatile.maxSize.2meg	1 to 20	20	Attribute applies to platforms with 2
			Mbytes of flash memory. Maximum
			size in Kbytes of non-volatile
			storage that the directory will be
			permitted to consume.
dir.local.volatile.4meg	0, 1	0	Applies to platforms with 4 Mbytes
			of flash memory.
			If set to 1, use volatile storage for
			phone-resident copy of the directory
			to allow for larger size.
dir.local.nonVolatile.maxSize.4meg	1 to 50	50	Applies to platforms with 4 Mbytes
			of flash memory. Maximum size in
			Kbytes of non-volatile storage that
			the directory will be permitted to
			consume.
dir.local.volatile.maxSize	1 to 100	100	Maximum size in Kbytes of volatile
			storage that the directory will be
			permitted to consume.
			Note: For the SoundPoint IP 650
			platform, this value is internally
			replaced by 2X the value.
dir.local.volatile.8meg	0, 1	0	Attribute applies only to platforms
			with 8 Mbytes of flash memory.
			If set to 1, use volatile storage for
			phone-resident copy of the directory
			to allow for larger size.

A - 59