Polycom SIP 2.2.2 manual Multiple Line Keys per Registration, Feature Key Layouts on page C-10

Administrator’s Guide SoundPoint IP / SoundStation IP

•The phone keys without removable key caps cannot be remapped. These include:

—Any keys on the dial pad

—Volume control

—Handsfree, Mute, Headset

—Hold

—Navigation Cluster

Configuration changes can performed centrally at the boot server:

Central	Configuration File:	Set the key scrolling timeout, key functions, and sub-pointers for each
(boot server)	sip.cfg	key (usually not necessary).
		• For more information, refer to Keys <key/> on page A-63.

For more information on the default feature key layouts, refer to Default

Feature Key Layouts on page C-10.

Multiple Line Keys per Registration

More than one Line Key can be allocated to a single registration (phone number or line). The number of Line Keys allocated per registration is configurable.

Configuration changes can performed centrally at the boot server or locally:

Central	Configuration file:	Specify the number of line keys to assign per registration.
(boot server)	phone1.cfg	• For more information, refer to Registration <reg/> on page A-84.
Local	Web Server	Specify the number of line keys to assign per registration.
	(if enabled)	Navigate to http://<phoneIPAddress>/reg.htm
		Changes are saved to local flash and backed up to <Ethernet
		address>-phone.cfgon the boot server. Changes will permanently
		override global settings unless deleted through the Reset Local
		Config menu selection and the <Ethernet address>-phone.cfgis
		removed from the boot server.
	Local Phone User	Specify the number of line keys to assign per registration using the
	Interface	SIP Configuration menu. Either the Web Server or the boot server
		configuration files or the local phone user interface should be used to
		configure registrations, not a mixture of these options. When the SIP
		Configuration menu is used, it is assumed that all registrations use
		the same server.

4 - 22