Briggs & Stratton 91200, 92200, 94200 Removing and RE-INSTALLING AIR Cleaner, Pre-cleaner

Page 12

MAINTENANCE

CHANGING OIL IN GEAR REDUCTION (if equipped)

Change oil in gear reduction after every 100 hours of operation.

OIL FILLER PLUG

VENT HOLE

4 GEAR CASE COVER SCREWS

OIL LEVEL

PLUG

[1]To drain oil, loosen 4 gear case cover screws and drain oil into appropriate receptacle.

[2]After draining, torque 4 screws to 85 in-lbs.

[3]To refill, pour SAE 30 oil into oil fill hole until it runs out level check hole.

[4]Replace both oil plugs.

Note: Oil filler plug has a vent hole and must be installed on top of gear case cover.

AIR CLEANER

All engines have an air cleaner cartridge. In addition, some engines have a pre-cleaner.

SCREWS

COVER

PRE–CLEANER

P/N 491435

CARTRIDGE

P/N 491588

OR 5043

BASE

REMOVING AND RE-INSTALLING AIR CLEANER

[1]Loosen screws and remove cover.

[2]Remove pre-cleaner (if equipped) and cartridge carefully to prevent debris from entering carburetor.

[3]Re-install clean (or new) air cleaner assembly in base.

[4]Replace cover and tighten screws.

CLEANING PRE-CLEANER AND CARTRIDGE

CAUTION: Do not use pressurized air or solvents to clean cartridge. Pressurized air can damage cartridge; solvents will dissolve cartridge.

Pre-cleaner

To clean pre-cleaner (if equipped), separate it from cartridge and wash in liquid detergent and water. Air dry thoroughly. Do not oil. Re-install dry pre-cleaner on clean cartridge.

Cartridge

To clean cartridge, gently tap pleated paper side on a flat surface.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Operating & Maintenance Instructions Table of ContentsPower in Power EQUIPMENT Hazard Symbols and Meanings Before Operating EngineSafety Broken bones, fractures, bruises or sprains could result Engine Parts Engine ModelModel Series OIL OIL CapacityType of OIL to USE Checking and Adding OILFuel Type of Fuel to USEAdding Fuel Fuel FillStarting Starting and Operating TipsStarting and Stopping Rewind Manual StarterTo Start Engine To Stop EngineMaintenance MaintenanceEmission Control Changing OILAIR Cleaner Removing and RE-INSTALLING AIR CleanerCleaning PRE-CLEANER and Cartridge Pre-cleanerEngine and Engine Parts Adjustments Throttle AdjustmentCarburetor Adjustment Service & Storage ServicePartial List of Genuine Briggs & Stratton Parts PartStorage CityBriggs & Stratton Emission Control Defects Warranty Coverage Improper maintenance Normal wearBriggs & Stratton Engine Owner Warranty Policy Pièces sous garantie Durée de la couverture

91200, 92200, 94200 specifications

Briggs & Stratton is a renowned name in the world of small engines, providing reliable and powerful solutions for a variety of applications. Among their extensive portfolio, the 91200, 92200, and 94200 series stand out for their exceptional performance and innovative features, making them ideal choices for various outdoor equipment.

The Briggs & Stratton 91200, for instance, is designed for applications requiring a compact engine solution. It features a powerful 224cc displacement, delivering ample torque for everyday tasks such as lawn mowing or garden maintenance. One of the key technologies integrated into this engine is the Quick Start Engine System, which facilitates effortless starting, even in cold weather. Additionally, the 91200 is equipped with an advanced oil lubrication system that enhances engine longevity and performance, ensuring that users can rely on it for years of dependable operation.

Moving on to the 92200 series, this engine is characterized by its 250cc displacement, providing not only greater power but also improved fuel efficiency compared to its predecessor. The 92200 engine is ideal for heavier-duty equipment, such as riding lawn mowers and larger garden tractors. A notable feature is its overhead valve design, which promotes better fuel combustion and reduces emissions, aligning with modern environmental standards. Furthermore, the engine incorporates a cast-iron cylinder sleeve for enhanced durability, making it well-suited for users who demand consistent performance over extended periods.

Lastly, the Briggs & Stratton 94200 series takes performance to new heights with a robust 330cc engine. This powerful engine is specifically engineered for commercial-grade applications, where reliability and efficiency are paramount. One of the standout technologies in the 94200 series is the ReadyStart technology, which eliminates the need for manual choke, allowing for quick, hassle-free starts every time. Additionally, the 94200 comes with a patented integrated fuel tank design that minimizes spillage and ensures efficient fuel use. With its heavy-duty construction and high torque output, this engine is the perfect choice for commercial landscapers and contractors.

In summary, the Briggs & Stratton 91200, 92200, and 94200 series engines are expertly engineered with cutting-edge technology and features that cater to a wide range of users. From the compact, efficient 91200 to the powerful, commercial-ready 94200, there’s a Briggs & Stratton engine for every need, ensuring that you can tackle outdoor tasks with confidence and ease.
Top Page Image Contents