Briggs & Stratton 91200, 92200, 94200 warranty OIL Capacity, Type of OIL to USE, Oil Fill

Page 7

274778

CAUTION: This engine is shipped from Briggs & Stratton without oil. Check oil level before starting engine. If you start the engine without oil, the engine will be damaged beyond repair and will not be covered under warranty.

Note: If this engine is equipped with gear reduction, gear reduction case must be filled with oil prior to operating en- gine. See gear reduction oil filling instructions on page 12.

OIL CAPACITY

The engine holds approximately 2/3 qt (21 ozs; 0.6 liter).

TYPE OF OIL TO USE

•Use a high quality detergent oil classified “For Service SF, SG, SH, SJ” or higher, such as Briggs & Stratton 30W, Part Number 100005 (20 oz) or 100028 (48 oz).

•Do not use special additives.

•Choose a viscosity according to the table opposite.

Note: Synthetic oil meeting ILSAC GF-2, API certification mark and API service symbol (shown at left) with “SJ/CF ENERGY CON- SERVING” or higher, is an acceptable oil at all temperatures. Use of synthetic oil does not alter required oil change intervals.

OIL

SAE Viscosity Grades

 

 

 

**

 

 

 

 

 

 

 

 

 

*

 

 

 

° F -20

0

20

32

40

60

 

80

100

° C -30

-20

-10

0

 

10

20

30

40

STARTING TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE

*CAUTION: Air cooled engines run hotter than automotive engines. The use of non-synthetic

multi-viscosity oils (5W-30, 10W-30, etc.) in temperatures above 40° F (4° C) will result in higher than normal oil consumption. When using a multi-viscosity oil, check oil level more frequently.

**CAUTION: SAE 30 oil, if used below 40° F (4° C), will result in hard starting and possible engine bore damage due to inadequate lubrication.

CHECKING AND ADDING OIL

•Check oil level before starting the engine.

•Check level daily, or after every eight (8) hours.

Oil Fill

[1]Place engine level and clean around oil fill area.

OIL LEVEL

[3]Add oil, if needed.

[4]Pour slowly. Fill to point of overflowing.

•Keep oil level at FULL.

•Do not overfill.

[2]Remove oil fill cap.

[5]Replace and tighten oil fill cap.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Table of Contents Operating & Maintenance InstructionsPower in Power EQUIPMENT Before Operating Engine Hazard Symbols and MeaningsSafety Broken bones, fractures, bruises or sprains could result Engine Model Engine PartsModel Series Checking and Adding OIL OILOIL Capacity Type of OIL to USEFuel Fill FuelType of Fuel to USE Adding FuelStarting and Operating Tips StartingTo Stop Engine Starting and StoppingRewind Manual Starter To Start EngineChanging OIL MaintenanceMaintenance Emission ControlPre-cleaner AIR CleanerRemoving and RE-INSTALLING AIR Cleaner Cleaning PRE-CLEANER and CartridgeEngine and Engine Parts Throttle Adjustment AdjustmentsCarburetor Adjustment Part Service & StorageService Partial List of Genuine Briggs & Stratton PartsCity StorageBriggs & Stratton Emission Control Defects Warranty Coverage Normal wear Improper maintenanceBriggs & Stratton Engine Owner Warranty Policy Pièces sous garantie Durée de la couverture

91200, 92200, 94200 specifications

Briggs & Stratton is a renowned name in the world of small engines, providing reliable and powerful solutions for a variety of applications. Among their extensive portfolio, the 91200, 92200, and 94200 series stand out for their exceptional performance and innovative features, making them ideal choices for various outdoor equipment.

The Briggs & Stratton 91200, for instance, is designed for applications requiring a compact engine solution. It features a powerful 224cc displacement, delivering ample torque for everyday tasks such as lawn mowing or garden maintenance. One of the key technologies integrated into this engine is the Quick Start Engine System, which facilitates effortless starting, even in cold weather. Additionally, the 91200 is equipped with an advanced oil lubrication system that enhances engine longevity and performance, ensuring that users can rely on it for years of dependable operation.

Moving on to the 92200 series, this engine is characterized by its 250cc displacement, providing not only greater power but also improved fuel efficiency compared to its predecessor. The 92200 engine is ideal for heavier-duty equipment, such as riding lawn mowers and larger garden tractors. A notable feature is its overhead valve design, which promotes better fuel combustion and reduces emissions, aligning with modern environmental standards. Furthermore, the engine incorporates a cast-iron cylinder sleeve for enhanced durability, making it well-suited for users who demand consistent performance over extended periods.

Lastly, the Briggs & Stratton 94200 series takes performance to new heights with a robust 330cc engine. This powerful engine is specifically engineered for commercial-grade applications, where reliability and efficiency are paramount. One of the standout technologies in the 94200 series is the ReadyStart technology, which eliminates the need for manual choke, allowing for quick, hassle-free starts every time. Additionally, the 94200 comes with a patented integrated fuel tank design that minimizes spillage and ensures efficient fuel use. With its heavy-duty construction and high torque output, this engine is the perfect choice for commercial landscapers and contractors.

In summary, the Briggs & Stratton 91200, 92200, and 94200 series engines are expertly engineered with cutting-edge technology and features that cater to a wide range of users. From the compact, efficient 91200 to the powerful, commercial-ready 94200, there’s a Briggs & Stratton engine for every need, ensuring that you can tackle outdoor tasks with confidence and ease.
Top Page Image Contents