Operation
How To Engage The Mower Blade
1.Start the engine.
2.Move the blade control (A, Figure 8) to the ON position.
NOTICE: If the transmission is moved into reverse while the mower blade is engaged, the engine will shut off. If mowing in reverse is necessary, refer to “Reverse Mowing Option (RMO)”.
! | WARNING | ! |
LOOK and SEE behind and down for children, pets and hazards before and while backing.
A |
A |
Figure 8: Engaging the blade control |
|
|
|
| |
How To Engage The Transmission |
|
| |||
1. Start the engine. | Reproduction |
| |||
Manual Drive Models: |
|
|
|
| |
1. | Start the engine. |
|
| Figure 9: Clutch/brake pedal |
|
2. | To move forward: |
|
|
| |
• Depress the clutch/brake pedal (A, Figure 9). |
|
| |||
• | Move the transmission shift lever (A, Figure 10) from |
|
| ||
3. | the Neutral (‘N’) position (B) into the first forward speed | E | D | ||
To move backward: |
| forward | |||
| notch (C). |
|
|
| A |
• | Release the clutch/brake pedal to begin |
|
| B | |
| motion. |
|
|
| |
• | During forward motion, the transmission shift lever may |
| C | ||
| be placed in any desired forward speed (D) without |
|
| ||
| depressing the clutch/brake pedal. |
|
|
|
|
• Depress the clutch/brake pedal (A, Figure 9). |
|
| |||
• | Move the transmission shift lever (A, Figure 10) from |
|
| ||
| the Neutral (‘N’) position (B) into the reverse speed slot |
|
| ||
| (E). |
|
|
|
|
• During reverse motion, the transmission shift lever |
|
| |||
| may be placed in any desiredNotreverse speed without |
|
| ||
| depressing the clutch/brake pedal. |
|
| Figure 10: Transmission shift lever (manual drive models) | |
Hydro Drive Models: |
|
| |||
|
|
|
| ||
2. Make sure the parking brake is released. Refer to “How |
|
| |||
3. | To Set The Parking Brake”. |
|
|
|
|
To move forward: |
|
|
|
| |
• | Slowly depress the forward ground speed pedal (A, | A |
| ||
| Figure 11) to begin forward motion. Increase ground |
| |||
4. | speed by further depressing the pedal. |
| B |
| |
To move backward: |
|
|
| ||
• | Slowly depress the reverse ground speed pedal (B, |
|
| ||
| Figure 11) to begin reverse motion. Increase ground |
|
| ||
| speed by further depressing the pedal. |
|
|
|
NOTE: For best cutting results, choose a slow forward |
|
speed with the engine speed control in the FAST position. |
|
This combination will allow the mower blade to lift the grass | Figure 11: Ground speed pedals (hydro drive models) |
while cutting smoothly and evenly. |
en | 17 |