Briggs & Stratton 7800920-00, 7800918-00, 7800932-00, 7800921-00 Engine, Mower Blade, Transmission

Page 18

Operation

!

WARNING

!

DO NOT leave the machine with the engine running. STOP Blade. STOP engine. Shift to neutral and engage parking brake. Remove key.

How To Stop The Engine, Transmission And Mower Blade

Engine

1.Stop the engine by turning the ignition key (A, Figure 12) to the OFF position.

2.Remove the key.

A

Figure 14: Ground speed pedals (hydro drive models)

A

Mower Blade

 

 

 

 

 

1. Stop the mower blade by moving the blade control (A,

 

 

 

 

 

 

Figure 15) to the OFF position.

 

 

 

 

 

 

 

 

A

 

Reproductmachine to ionan authorized dealer for adjustment. DO NOT

 

 

 

 

 

 

 

 

A

 

Figure 12: Turning ignition key to OFF

 

 

 

 

 

 

Transmission

Not

!

WARNING

!

Manual Drive Models:

 

 

 

 

 

 

 

1. Stop motion of the unit by fully depressingforthe clutch/

 

 

Figure 15: Blade control

 

 

brake pedal (A, Figure 13) to disengage the clutch and

 

 

 

 

apply the brake.

 

 

 

 

 

 

 

2. Return the transmission shift lever to the Neutral (‘N’)

 

 

 

 

 

 

position. Refer to “How To Engage The Transmission”.

 

 

 

 

 

 

 

Once blade is disengaged, it should come to a complete

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

stop in 5 seconds or less. If the blade continues to rotate

 

 

 

 

 

after 5 seconds, the blade brake must be adjusted. Return

 

 

 

 

 

CONTINUE to operate machine until blade brake is adjust-

 

 

 

 

 

ed and functioning properly.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 13: Clutch/brake pedal

Hydro Drive Models:

1.Stop motion of the unit by fully releasing the ground speed pedals (A, Figure 14). Additional braking can be

achieved by depressing the brake pedal (A, Figure 13).

18

www.snapper.com

Image 18
Contents Reproduction Not ForNot Table of Contents Read the Manual Operator Safety Operating SafetyNot Orf ChildrenC il renReproductioReversenOperator Safety Slope Operation Fuel and MaintenanceReproduction Thrown ObjectsMoving Parts Operator Safety Protection Against Tip-Overs/Roll-OversProtection for Children Preparation OperationSafe Handling of Gasoline Maintenance TowingFor Safety and Instructional Decals Reproduction ForExplanation of Safety Decals Explanation of Instructional DecalsFor Not Features and Controls Features and ControlsBefore Starting How To Check/Add OilOperation Before adding or checking the oilHow To Adjust The Operator Seat How To Add FuelFuel Recommendations How To Start The Engine How To Engage The Mower Blade ForwardEngine Mower BladeTransmission How To Set The Parking Brake Reverse Mowing Option RMO DeflectorHow To Push The Unit By Hand Repr OductionTowing Implements Maintenance Maintanance ChartEmissions Control How To Change The Oil Filter if EquippedFlat Air Filter How To Service The Air FilterNotB Oval Air FilterRider Maintenance Basic How To Check The Mower Blade Rider Maintenance AdvancedHow To Service The Fuel Filter How To Check The Mower Drive BeltsHow To Lubricate Mower Blade Spindle How To Lubricate Grease FittingsHow To Lubricate Differential / Chain How To Lubricate Mower Deck LinkageHow To Install The Battery Battery Service Sealed Lead Acid TypeHow To Remove The Battery How To Charge The Battery How To Store The BatteryBattery Service Valve Regulated Type Battery valve regulated typeStorage Fuel SystemBriggs & Stratton Fresh Start available in a drip con How To Sharpen The Mower Blade Engine Adjustments and RepairsRider Adjustments And Repairs How To Inspect The Mower BladeRepair How To Level The Mower DeckReproduction B Side-To-Side LevelingManual Drive Models How To Adjust The Brake / Parking BrakeHow To Adjust Mower Blade Belt Tension Hydro Drive ModelsHow To Adjust The Blade Brake How To Remove The Deck Cover Troubleshooting Problem Probable Cause Corrective ActionTroubleshooting Limited Warranty WarrantiesBriggs & Stratton Emissions Control Warranty Provisions Page Page 4.5 / 1,6 7,2 0 / 0 8,0