Briggs & Stratton 1695354 manual Remove Blowout Baffle, Install Baffles

Remove Blowout Baffle

1.Remove and discard short blowout baffle (C, Figure 4), carriage bolts (B) and locknuts (D) from mower deck (A).

Assembly	B
D	A
	D
	C

Figure 4. Baffle Removal

A.Mower Deck

B.Carriage Bolts,5/16-18 x 3/4

C.Blowout Baffle, Short

D.Nuts, Whizlock, 5/16-18 x 3/4

Install Baffles

1.Determine which baffle to use. See Figure 5 Chart.

2.Lift side discharge chute (H, Figure 6).

3.Insert baffle (F) through discharge opening and position baffle into place.

4.Tighten carriage bolts (A) and nuts (E) on baffle

(F).

5.Tighten carriage bolt (B) and nut (E) on baffle (F).

6.Position baffle (G) into place.

7.Tighten carriage bolts (C) and nuts (E) on baffle

(G).

8.Tighten carriage bolts (D) and nuts (E) on baffle

(G).

	44” Mower Deck	50” Mower Deck
“A”	RH side 26-1/4” long	RH side 29-3/4” long
“B”	LH side 24-7/8” long	LH side 27-3/4” long

“A”

“B”

Figure 5. Baffle Chart

6