Briggs & Stratton 1695354 manual Install Plates & Spacers, Install Spacers

Assembly

INSTALL MOUNTING PLATES - BROADMOOR / 1600 / 2600 / LT SERIES

Install Plates & Spacers

1.Mount the side brackets (C, Figure 1) to both sides of the frame using the holes shown. Secure with one 3/8-16 x 1 capscrew (D), 3/8 lockwasher (B), and 3/8-16 nut (A) per side.

2.Install the rear spacers (C, Figure 2). Secure with two 1/2-13 x 2-1/2 capscrews (E), washers (D), spacers (C), and 1/2-13 nylock nuts (A) per side.

INSTALL MOUNTING SPACERS - CONQUEST / 1700 / 2700 / YT & PRESTIGE / 1800 / 2800 / GT SERIES

Install Spacers

1.Install the rear spacers (C, Figure 3). Secure with two 1/2-13 x 2-1/2 capscrews (E), washers (D), spacers (C), and 1/2-13 nylock nuts (A) per side.

A
B	C
		Assembly
	D

Figure 1. Install Side Brackets

A.Nut, 3/8-16

B.Lockwasher, 3/8

C.Side Bracket

D.Capscrew, 3/8-16 x 1

A
	C
	D
D	B

Figure 2. Install Rear Spacers

A.Nylock Nuts, 1/2-13

B.Capscrew, 1/2-13 x 2-1/2

C.Spacers

D.Washers, 1/2

A
	C
	D
D	B

Figure 3. Install Rear Spacers

A.Nylock Nuts, 1/2-13

B.Capscrews, 1/2-13 x 2-1/2

C.Spacers

D.Washers, 1/2

5