Normal Removal & Installation
Normal Removal & Installation
E
F
R
Q
D
C
GD
A 
CB
S
P
H
O
S |
N | I | J | A. Hitch Support Assembly |
| ||
B. Cover | K. Nut & Capscrew | |||||
|
|
| ||||
|
| K | C. Pin | L. Mounting plate | ||
|
|
| D. Hair Pins | M. Lower Chute Rod | ||
|
|
| E. Bag | N. Lower Chute | ||
M |
|
| F. Grass Bag Hanger | O. Pin | ||
|
|
| G. Upper Tube | P. Strap, Middle | ||
| L |
| H. Middle Tube | Q. Ridge | ||
|
|
| I. | Strap, Boot | R. Ridge Cutout | |
|
|
| J. | Deflector | S. Rear Spacers | |
Figure 17. Normal Installation & Removal
Normal Removal & Installation
Collector Installation
Note: See previous pages for more detailed installation and operation instructions if necessary.
1.Mount the hitch support assembly (A, Figure 17) onto rear tractor frame spacers (S).
2.Attach cover (B) to support assembly using pins
(C) and hair pins(D).
3.Pivot cover (B) up. Install bags (E) by attaching grass bag hanger (F) to support assembly (A).
4.Lift discharge deflector (J) up. Insert lower chute rod (M) into mounting plate (L). Pull strap (I) and secure by placing hole closest to knob in strap completely over locknut and capscrew (K).
5.Slide the upper tube (G) into cover (B) aligning ridge (Q) with cutout (R) as shown.
6.Slide middle tube (H) into upper tube (G). Slide middle tube (H) over lower chute (N). Pull strap
(P) and place hole completely over pin (O).
14