Brinly-Hardy PA-40 BH, PA-48 BH owner manual TOW BAR Assembly

ASSEMBLY

Figure 3 TOW BAR ASSEMBLY 20 6 20

3a. Assemble Mount Brackets (31) to Tray (6) as shown. Insert the Bolts from the topside of the Tray. Loosely tighten with Nylon Lock Nuts (32).

IMPORTANT Tray with label faces forward.		31	31
		33
For PA-48 BH model install Center Plate (33)		32
to Tray (6) as shown. Insert the Bolts from the	32		32
topside of the Tray. Loosely tighten with Nylon
Lock Nuts (32).			32
		7

(20)	(32)
Hex Head Bolt, 5/16" x 3/4"	Nylon Lock Nut, 5/16"
Qty. 4 for PA-40 BH	Qty. 4 for PA-40 BH
Qty. 7 for PA-48 BH	Qty. 7 for PA-48 BH

Figure 4 CLEVIS ASSEMBLY

4a. Assemble the Clevis (2) to Tow bars (7) as shown. Install Carriage Bolts (29) and Nylon Lock Nuts (32) finger tight. Next install Hex Bolt (21) and Nylon Lock Nut (32) finger tight.

4b. Insert Hitch Pin (17) in Clevis (2) and secure with Hairpin Cotter (18). Grasp Hitch Pin and pull forward.

4c. Tighten securely all fasteners installed in step

4a. Then tighten securely all hardware installed in Steps 2 through 3.

17 29

32

2

(18)

Hairpin Cotter, 1/8"

Qty. 1

7

21

32

18

(32)		29
	(21)
Nylon Lock Nut, 5/16"
Qty. 3	Hex Head Bolt, 5/16" x 1-1/4"
	Qty. 1
		2
(29)		21
Carriage Bolt, 5/16" x 2-1/4"
Qty. 2	(17)
	Hitch Pin
	Qty. 1
		7

Hex Bolt (21) Goes

Between The Two

Carriage Bolts (29)

7

L-1762 Rev. E