Bounty Hunter 2200 Basic Operation, Powering UP, Sensitivity, Press the Power touch pad

Page 9

BASICOPERATION

SENSITIVITY

DISCRIMINATION

POWERING UP

Press the POWER touch pad.

•The detector will beep 4 times

•All display segments will illuminate momentarily

•The SENSITIVITY and BATTERY indicators will stay illuminated

SENSITIVITY

The detector’s default sensitivity will be indicated with two segments. At this setting, the detector will detect a coin-sized object, such as a quarter, buried approximately seven inches deep. To change the sensitivity level, and thus the detection depth, press the SENSITIVITY

▲or ▼ keys.

CAUTION:

At higher sensitivity levels, the detector is susceptible to electromagnetic interference from electronic devices. Reduce sensitivity if demonstrating indoors or if using near power lines or electrical equipment.

Reduce sensitivity if detector emits false signals

9

Image 9

Contents Page Table of Contents Elimination TerminologyAssembly is easy and requires no tools AssemblyAdjusting the Arm Rest Batteries To install the batteriesUick Start Demonstration III. Power UpSupplies Needed II. Position the DetectorVIII. Wave all objects over the Search Coil VI. Wave the Nail over Search CoilXI. Press the Notch touchpad again XII. Wave the zinc penny over the search coilPress the Power touch pad Powering UPBasic Operation SensitivityDiscrimination Mode Default OperationNotch Mode To use the Notch ModeTechnical Note ZAP Headphone JackTo demonstrate the ZAP control Bass Tone Audio Target IdentificationReading the Display Depth and Target DisplayElectromagnetic Interference Sensitivity AdjustmentField Techniques PinpointingCoil Movement What …MAY Reads Actually Like this Be this Field Techniques Trouble Shooting Guide Trouble ShootingTreasure HUNTER’S Code of Ethics