Bounty Hunter 2200 owner manual Technical Note, To use the Notch Mode

Page 11

BASICOPERATION

continued

To increase the level of discrimination, press the DISCRIMINATION ▲ touch pad. Each time the ▲ pad is depressed, an additional "R" will appear, thus eliminating from detection the objects which fall into the corresponding categories.

To decrease the level of discrimination, press the DISCRIMINATION ▼ touch pad. Each time the ▼ pad is depressed, an illuminated "R" will disappear, thus returning to detection the objects which fall into the corresponding categories.

Discrimination Mode is a fixed-start-point elimination system. Objects are cumulatively eliminated as the level of discrimination increases.

NOTCH MODE

To selectively eliminate a category from detection within the metallic spectrum, use the NOTCH Mode.

Technical Note:

The NOTCH touch pad causes the status of an "R" segment to toggle between ON and OFF.

To use the NOTCH Mode:

The NOTCH touch pad can be depressed at any time. But for first-time use, place the detector in ALL-METAL mode.

A first demonstration is best accomplished as follows:

1)Turn the power OFF.

2)Turn the power ON.

3)Press NOTCH.

A flashing "R" will appear under the IRON segment.

4)Press the DISCRIMINATION ▲ touch pad several times Notice that the "R" moves upon each press of the DISCRIMINATION ▲ touch pad.

5)Press NOTCH again.

The flashing "R" will become permanently illuminated.

If an object has been “notched-out”, you can return it to detection status. To “un-notch” a category:

1)Press NOTCH.

2)Move the flashing “R” over the permanently illuminated “R”.

3)Press NOTCH again.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Page Table of Contents Elimination TerminologyAssembly is easy and requires no tools AssemblyAdjusting the Arm Rest Batteries To install the batteriesII. Position the Detector III. Power UpUick Start Demonstration Supplies NeededXII. Wave the zinc penny over the search coil VI. Wave the Nail over Search CoilVIII. Wave all objects over the Search Coil XI. Press the Notch touchpad againSensitivity Powering UPPress the Power touch pad Basic OperationDiscrimination Mode Default OperationTechnical Note Notch ModeTo use the Notch Mode To demonstrate the ZAP control ZAPHeadphone Jack Bass Tone Audio Target IdentificationReading the Display Depth and Target DisplayElectromagnetic Interference Sensitivity AdjustmentCoil Movement Field TechniquesPinpointing What …MAY Reads Actually Like this Be this Field Techniques Trouble Shooting Guide Trouble ShootingTreasure HUNTER’S Code of Ethics
Top Page Image Contents