Bounty Hunter 2200 owner manual Zap, Headphone Jack, To demonstrate the ZAP control

BASICOPERATION

continued

ZAP

The ZAP control is a convenient way to eliminate a known undesirable metal object from detection.

To demonstrate the ZAP control:

1) Set the detector in All-Metal Mode

Note: ZAP functions in all modes, but is best demonstrated first from the All-Metal Mode.

2)Pass the search coil over an undesirable object.

3)Notice the Target Indication

Note: You can only ZAP objects that register under the five left-most segments (from Iron to Zinc).

4)Press ZAP. An "R" appears under the segment to be eliminated.

5)Pass the search coil over the same object again. The undesirable object is eliminated from detection

The ZAP control is easy to use in the field. As you are detecting, and encounter an object which you wish to eliminate from detection, simply press the ZAP touch pad after detecting the object.

The ZAP control eliminates the most-recently detected object category from detection. The category eliminated is indicated with an "R".

HEADPHONE JACK

Using headphones (not supplied) with your metal detector makes it easier to identify subtle changes in the threshold levels for better detection results, and also reduces drain on the batteries. The Discovery 2200 Metal Detector has a stereo headphone jack located at the rear of the case.

12