Samsung SNV-7082, SND-7082F, SNB-7002 user manual Control framerate, When done, click Apply

setup screen

6.Click the input box of each item and enter / select a desired value.

 The context menu may differ depending on the selected codec type.

•Default profile : If no profile is selected when using the Web Viewer, the default video profile is applied.

•E-mail/FTP profile : Video profile to be transferred to the specified email or FTP site.

Only the MJPEG codec can be set as the E-mail/FTP profile.

•Record profile : This is the profile that is applied to video recording.

•Audio-In : Sets whether to use audio for video recordings.

7.According to your situation, set ATC (Auto Transmit Control) mode.

•ATC mode : It adjusts the video properties according to the variance

in the network bandwidth, controlling the bit rate. Adjusting the bit rate depends on the ATC mode.

- Control framerate : Reduce the frame rate if the network bandwidth drops down.

- Control compression : Control the compression rate if the network bandwidth drops down.

Compression adjustment can cause deterioration of the image quality.

If <Bitrate control> is set to <CBR>, the encoding priority according to the ATC mode will be fixed as below:

Bitrate control / ATC mode	Control framerate	Control compression
CBR	Framerate	Compression

•ATC sensitivity : Affect the transfer rate according to the variance in the network bandwidth.

The transfer rate will be adjusted to the fastest if the bandwidth is <Very high>, and adjusted to the latest if the bandwidth is <Very low>.

•ATC limit : If the quality or frame rate is adjusted, the property will be changed to the applied value (%) against the previous setting value (100%).

Note that if you reduce the property value too much, you may encounter flickering on the screen. So it is advisable to adjust the value within the threshold.

J It is recommended to apply ATC control only for cameras supporting ATC.

Set the ATC sensitivity to <Very low> in a network environment with high variance in the network bandwidth.

If the network connection is unstable, you may encounter flickering on the screen.

8.When done, click [Apply ( )].

76_ setup screen