Samsung SND-7082F Connecting the Camera Directly to Local Area Networking, Local Network

network connection and setup

You can set up the network settings according to your network configurations.

CONNECTING THE CAMERA DIRECTLY TO LOCAL AREA NETWORKING

Connecting to the camera from a local PC in the LAN

1.Launch an Internet browser on the local PC.

2.Enter the IP address of the camera in the address bar of the browser.

Camera

Camera

Local PC

<Local Network>

INTERNET

Firewall External Remote PC

DDNS Server

(Data Center, KOREA)

M A remote PC in an external Internet out of the LAN network may not be able to connect to the camera installed in the intranet if the port-forwarding is not properly set or a firewall is set.

In this case, to resolve the problem, contact your network administrator.

By factory default, the IP address will be assigned from the DHCP server automatically. If there is no DHCP server available, the IP address will be set to 192.168.1.100.

To change the IP address, use the IP Installer.

For further details on IP Installer use, refer to “Static IP Setup”. (Page 55)

50_ network connection and setup