Samsung SND-7082, SNV-7082 Setting up Port Range Forward for several network cameras, Camera1

Setting up Port Range Forward for several network cameras

When several network cameras are connected to one Broadband Router device, you should forward the TCP 943 port of the router to the TCP 943 port of a connected camera.

J If you don't set properly the TCP 943 port of the router, you cannot get any video stream from the web page of the camera.

•TCP 943 port is a port for the Silverlight policy server of a camera.

•You can set a rule of Port Forwarding on the Broadband Router device through its configuration web page.

•You cannot change the Silverlight policy server port of a camera.

•You can change the ports of the camera except the policy server port through its configuration web pages.

When Camera1 and Camera2 are connected to a router :

● NETWORK CONNECTION AND SETUP

User		Ù Internet
				Ú
	Broadband Router
Start	End		Protocol		IP Address
943	943		TCP		192.168.1.100
3000	3000		TCP/UDP		192.168.1.100
3001	3001		TCP/UDP		192.168.1.101
4520	4520		TCP/UDP		192.168.1.100
4521	4521		TCP/UDP		192.168.1.101
8080	8080		TCP/UDP		192.168.1.100
8081	8081		TCP/UDP		192.168.1.101

Ù

Ù

Camera1 (192.168.1.100)

Web Server Port	8080
Device port	4520
RTSP port	3000
Policy server port	943
Camera2 (192.168.1.101)
Web Server Port	8081
Device port	4521
RTSP port	3001
Policy server port	943

English _61