Samsung SNB-7002, SNV-7082, SND-7082F user manual English

•Dwell time : This is the time while each applicable lighting condition is kept in order to enable the switch between day and night modes.

•Duration : Specify the time interval of lighting at which the sequence operation is triggered.

•Sharpness mode : Adjust the overall sharpness of the image. If selecting <On>, you can adjust the sharpness of the image.

•Sharpness level : The higher the level is, the sharper and clearer the outline of the image becomes.

•Gamma : Adjust the contrast of the image.

•Color level : Adjust the color level of the image.

•Alarm in : Set the image to Color or B/W depending on the Open/Close state of the alarm sensor.

If the Day & Night mode is set to Externel B/W, the alarm-in function of the event-alarm input page will be disabled.

OSD Setup

1.Select <OSD>.

2.Select each item and set it properly.

•Camera title : Specify whether or not to display the camera title on the screen.

 You can enter up to 15 characters for the title.

•Camera title position X, Y : Specify the coordinates where the camera title is displayed on the screen.

Time OSD Setup

1.Select <Time OSD>.

2.Select each item and set it properly.

•Time display : Specify the use of time display on the screen.

•Date format : Specify the date format that will be displayed on the screen.

•Time position display X, Y : Specify the position of time display on the screen.

•Display weekday : Specify the use of date display date on the screen.

● SETUP SCREEN

English _87