Samsung SNV-7082 Address pane, provide the necessary information, If not using a Broadband Router

network connection and setup

3.In the <Address> pane, provide the necessary information.

•MAC (Ethernet) Address : The MAC address imprinted on the camera label is automatically displayed and requires no user setting.

M You can configure the static IP settings only if the DHCP checkbox is unchecked.

If not using a Broadband Router

For setting <IP Address>, <Subnet Mask>, and <Gateway>, contact your network administrator.

4.In the <Port> pane, provide necessary information.

•HTTP Port : Used to access the camera using the Internet browser, defaulted to 80.

•VNP Port : Used to control the video signal transfer, defaulted to 4520.

5.Enter the password.

Enter the password of “admin” account, which was used to access the camera. The default password is “4321”.

J The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product.

Note that the security and other related issues caused by the unchanged password shall be responsible for the user.

If you want to change the password, refer to “Administrator password change” of the user setup. (page 118)

6.Click [OK].

Manual network setup will be completed.

56_ network connection and setup