Samsung SND-7082 Reset Button, Button adjusts the focus of image automatically, Alarm I/O Port

Item		Description
	The button restores all camera settings to the factory default.
	Press and hold for about 5 seconds to reboot the system.
Reset Button	J If you reset the camera, the network settings will be adjusted so that
	DHCP can be enabled. If there is no DHCP server in the network, you
	must run the IP Installer program to change the basic network settings
	such as IP address, Subnet mask, Gateway, etc., before you can connect
	to the network.
Focus Adjustment	The button adjusts the focus of image automatically.
Button
Power Port	Used to plug the power cable.
Lightning protective	Used to discharge the lightning current safely outside in order to protect the
grounding port	camera.
Network Port	Used to connect the PoE or Ethernet cable for network connection.
	ALARM IN	Used to connect the alarm input signal.
Alarm I/O Port	ALARM OUT	Used to connect the alarm output signal.
	GND	Used for earth-grounding.
Test Monitor Out	Output port for test monitoring the video output. Use the test monitor cable
	to connect to a mobile display and check the test video.

● OVERVIEW

English _17