Samsung SND-7082F, SNV-7082, SNB-7002 user manual Components

overview

Components

b

c

Item		Description
Network Port	Used to connect the PoE or Ethernet cable for network connection.
	ALARM IN	Used to connect the alarm input signal.
b Alarm I/O Port	ALARM OUT	Used to connect the alarm output signal.
	GND	Used for earth-grounding.
c Test Monitor Out	Output port for test monitoring the video output. Use the test monitor cable
	to connect to a mobile display and check the test video.
	The button restores all camera settings to the factory default.
	Press and hold for about 5 seconds to reboot the system.
Reset Button	J If you reset the camera, the network settings will be adjusted so that
	DHCP can be enabled. If there is no DHCP server in the network, you
	must run the IP Installer program to change the basic network settings
	such as IP address, Subnet mask, Gateway, etc., before you can
	connect to the network.

26_ overview