Samsung SNB-7002, SNV-7082, SND-7082F Enter an IP address to which you will apply QoS

QoS

You can specify the priority to secure a stable transfer rate for a specific IP.

1.From the Setup menu, select the

<Network ( )> tab.

2.Click <QoS>.

3.Click the [Add ( )] button. The IP list will be created.

4.Enter an IP address to which you will apply QoS.

M The default prefix for IPv4 is 32; For DSCP, the default is set to 63.

Only the IP addresses that are set to <Use> can be prioritized.

5.Select an IP to delete from the list.

Click the [Delete ( )] button.

6.When done, click [Apply ( )].

SNMP

With the SNMP protocols, the system or network admin can monitor the network devices on a remote site, and configure the environment settings.

1.From the Setup menu, select the

<Network ( )> tab.

2.Click <SNMP>.

3.Specify the <SNMP>.

•Enable SNMP v1 : SNMP version 1 will be active.

•Enable SNMP v2c : SNMP version 2 will be active.

-Read community : Provide the

name of the read community where you can access to the SNMP information. The default name is <public>.

-Write community : Provide the name of the write community where you can access to the SNMP information. The default name is <write>.

● SETUP SCREEN

English _99