Samsung SNV-7082, SND-7082F, SNB-7002 user manual Face detection, When done, click Apply

Face detection

You can set to detect recognized face and trigger an event accordingly.

1.From the Setup menu, select the

<Event ( )> tab.

2.Click <Event setup>.

3.Select <Face detection> from <Event action setup>.

4.Set whether or not to <Enable>.

5.Select <Sensitivity> tab to set the sensitivity level.

As the sensitivity grows, face detection becomes more close and detailed.

6.Select <Area> tab and drag on the screen to define the desired detection area. You can specify up to 4 detection areas.

M Conditionsbelow: for face detection are as

Face detection can be applied to videos having the QVGA (320x240) resolution only.

For detection, the face area should be bigger than 20~40 pixels at least.

Up to 35 faces within one frame image can be recognized in maximum, unable to detect more.

7.To delete a defined area, click [Clear] button while the Area tab is selected.

8.Set whether to use <Detection result overlay>.

When faces are detected, their positions and sizes are marked with rectangles on the screen.

9.Specify the activation time and activation condition.

For more information about <Activation time> and <Action>, refer to “Alarm input”. (page 103)

10.When done, click [Apply ( )].

● SETUP SCREEN

English _113