Samsung SNV-7082 Attaching to the unbundled adapter, Optional Accessories for Installation

installation & connection

4.Loosen and remove the case-fixing screws on the camera unit. (x3)

5.Insert the camera unit into the hole so that it fits to the camera hole, and fix the unit using the ASSY tapping screws (TH M4×L30). (x3)

6.Adjust the lens in a desired direction by referring to the “Adjusting the monitoring direction for the camera” section. (page 38)

7.Close the top cover.

 To ensure waterproofing, tight up the fixing bolts using the L-wrench.

Attaching to the unbundled adapter

Choose and purchase a necessary one of the following options (unbundled) that is suitable to the installation site or for your convenience.

1. Remove the top cover from the case by referring to the “Disassembling” section. (page 34)

2. Use the provided machine screw to fix the camera case to the unbundled adapter.

3.Connect and arrange the necessary cables lest that

they should be damaged or twisted while installing the camera.

4. Install the camera body in the reverse order of “Disassembling”. (page 34)

5. Adjust the lens in a desired direction by referring to the “Adjusting the monitoring direction for the camera” section. (page 38)

6.Close the top cover.

 To ensure waterproofing, tight up the fixing bolts using the L-wrench.

Optional Accessories for Installation

For your easier installation, you can purchase appropriate optional accessories available.

1. WALL MOUNT ADAPTOR(SBP-300WM or SBP-300WM1)/HANGING MOUNT (SBP-300HM3)

This adaptor is used when installing the dome camera onto a wall.

36_ installation & connection