Samsung SNV-7082, SND-7082F, SNB-7002 user manual Setup screen

setup screen

-Manual : Adjust the shutter speed of the camera manually.

You can select one between 1/30 and 1/12000sec in 2 mega mode, and select one between 1/20 and 1/12000sec in 3 mega mode.

-A.FLK (Anti flicker) : Select this feature if you encounter a flickering screen due to a frequency mismatch with the ambient lighting.

•Shutter speed : Control the shutter speed manually.

•SSNR3 : Specify the use of noise reduction.

•SSNR3 level : Adjust the noise reduction level.

•Sens-up mode : Automatically senses the darkness level at night or in a low contrast scene and extends the accumulation time accordingly for a bright and sharp image.

 If you set the shutter mode to Manual/A.FLK, SENS-UP mode will be deactivated.

 The greater the Sens-Up factor is, the brighter the screen becomes but it may result in an afterimage or video delay.

•Sens-up limit : Set the work condition to Auto mode in a low contrast scene.

•Lens : Select to set the lens mode of the camera to Manual or Auto.

-DC(Auto) : Select this if you use the DC lens. Only the iris is adjusted automatically, but the focus is not controlled automatically.

-Manual : Select this if you use a lens on which you adjust the iris and focus manually.

•AGC mode : Select AGC Control mode.

Adjust the gain value of the video (that, in particular, was recorded at a low contrast scene and had a lower brightness level than normal) to control the video brightness.

Exposure Setup (SND-7082/SND-7082F/SNV-7082)

You can adjust the exposure level of the camera.

1.Select <Exposure>.

2.Select each item and set it properly.

•Brightness : Adjust the screen brightness.

•Shutter mode : Adjust the electronic shutter of the camera.

-ESC (Electronic shutter control) : Adjust the shutter speed automatically according to the ambient brightness.

 This will be activated if <Iris> is set to <Manual>.

84_ setup screen