Samsung SND-7082F, SNV-7082, SNB-7002 user manual 802.1x

setup screen

802.1x

When connecting network, you can choose whether using 802.1x protocol, and then install the certification.

1.From the Setup menu, select the

<Network ( )> tab.

2.Click <802.1x>.

3.Set the <IEEE 802.1x setting(EAPOL using EAP-TLS)>.

•Enable IEEE 802.1x : Specify the use of the 802.1x protocol.

•EAPOL version : Select version 1 or 2.

•ID : Enter the client certificate ID.

•Password : Enter the client private

key password. If the key file used is not encrypted, you don’t need to enter it.

J If the connected network device does not support the 802.1x protocol, the protocol will not operate properly even if you set it.

4.Install/remove the certificate.

•CA certificates : Select a public certificate that contains the public key.

•Client certificate : Select a public certificate that contains the client certificate key.

•Client private key : Select a public certificate that contains the client private key.

5.When done, click [Apply ( )].

To install/remove 802.1x related certificates

1.Press the [Browse ( )] button for each item and select a certificate to install.

2.If no certificate is installed, you will see “Not Available” appearing next to the selected item.

3.Press the [Install ( )] button to start installation with a message of “Installed” next to the item.

4.Press the [Delete ( )] button to remove the certificate.

98_ setup screen