Samsung SND-7082F, SNV-7082, SNB-7002 user manual Motion detection / Video analytics

setup screen

Motion detection / Video analytics

Events of motion detection and video analysis can be set to trigger event signal output.

1.From the Setup menu, select the

<Event ( )> tab.

2.Click <Event setup >.

3.Select <Motion detection / Video analytics> from <Event action setup>.

4.Set whether or not to <Enable>.

5.According to your purpose, select from motion detection and intelligent video analysis.

6.Set <Sensitivity>, <Size> and <Area>. When selected Intelligent Video Analysis, set <Analytics> too.

7.Set whether to use <Detection result overlay>.

When a motion is detected, its size and position is marked with a rectangle on the screen.

•Green : All targets detected as moving.

•Red : All targets detected as passing, entering or exiting.

(Colored marking remains for 1 ~ 2 seconds.)

•Blue: All targets detected as Appear/Disappear event. (Colored marking remains for 3 ~ 5 seconds.)

8.Specify the activation time and activation condition.

 For more information about <Activation time> and <Action>, refer to “Alarm input”. (page 103)

9.When done, click [Apply ( )].

106_ setup screen