Samsung SND-7082F, SNV-7082, SNB-7002 user manual Audio detection, Network disconnection

setup screen

Audio detection

You can set to detect sound over the specified level and trigger an event accordingly.

1.From the Setup menu, select the

<Event ( )> tab.

2.Click <Event setup>.

3.Select <Audio detection> from <Event action setup>.

4.Set whether or not to <Enable>.

5.Set the audio detection’s sound level. The lower the level, the smaller the sound change is detected.

6.Specify the activation time and activation condition.

For more information about <Activation time> and <Action>, refer to “Alarm input”. (page 103)

7.When done, click [Apply ( )].

M If detected audio level is too low, set the audio input gain to a higher level in <Audio setup>.

Network disconnection

You can receive and save events of a physically disconnected network.

1.From the Setup menu, select the

<Event ( )> tab.

2.Click <Event setup>.

3.Select <Network disconnection> from <Event action setup>.

4.Set whether or not to <Enable>.

5.Specify the activation time and activation condition.

For more information about <Activation time> and <Action>, refer to “Alarm input”. (page 103)

6.When done, click [Apply ( )].

114_ setup screen