Samsung SNV-7082, SND-7082F, SNB-7002 user manual IP filtering

setup screen

IP filtering

You can create a list of IPs that you want to grant or deny access to them.

1.From the Setup menu, select the

<Network ( )> tab.

2.Click <IP filtering>.

3.Select <Filtering type>.

•Deny : If selecting this, access from those IPs that are added to the filtering will be restricted.

•Allow : If selecting this, access from only those IPs that are added to the filtering will be accepted.

4.Click the [Add ( )] button. The IP list will be created.

5.Provide the IP that you want to grant or deny access from.

When you enter an IP address and a Prefix, the list of IP addresses available will appear in the right-side filter range column.

M If selected <Allow> for IP Filtering and <IPv6 setup> of <Interface> is set to <Use>, both IPv4 and IPv6 addresses of the computer currently configuring should be assigned.

The IP address of the computer used for the current setup cannot be added to <Deny>, it should be added to <Allow>.

Only the IP addresses that are set to <Use> will be displayed in the filter column.

6.Select an IP to delete from the list.

Click the [Delete ( )] button.

7.When done, click [Apply ( )].

96_ setup screen