Samsung Camera Default Password, Login, and DDNS Setup Guide

web viewer

To check the DDNS address

If the camera is connected directly to the DHCP cable modem, DSL modem, or PPPoE modem, the IP address of your network will be changed each time you try to connect to the ISP (Internet Service Provider) server.

If this is the case, you will not be informed of the IP address changed by DDNS.

Once you register a dynamic IP-based device with the DDNS server, you can easily check the changed IP when you try to access the device.

To register your device to the <DDNS> server, visit www.samsungipolis.com and register your device first, and then set the Web Viewer’s <Network> - <DDNS> to <Samsung DDNS>, as well as providing <Product ID> that had been used for DDNS registration.

LOGIN

Whenever you access the camera, the login window appears.

Enter the User ID and password to access the camera.

1.Enter “admin” in the <User Name> input box.

The administrator ID, “admin”, is fixed and can not be changed.

2.Enter “4321” in the <Password> input box.

If the password is changed, enter the changed password instead.

3.Click [OK].

If you have logged in successfully, you will the Live Viewer screen.

M

J

The default user ID is “admin”, and the default password is “4321”.

For security purposes, ensure that you change the password in <System> - <User>.

The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product.

Note that the security and other related issues caused by the unchanged password shall be responsible for the user.

If you check the “Remember my password” option when your input is done, in future you will be logged in automatically without being prompted to enter the login information.

You will experience the best video quality if the screen size is 100%. Reducing the ratio may cut the image on the borders.

64_ web viewer