Samsung SNV-7082, SND-7082F, SNB-7002 user manual To add an alarm cable not included

To add an alarm cable (not included)

1.For this, first you should remove the top cover from the housing.

2.Pull out the protruding rubber bar as shown.

3.This will reveal a hole in the place of the rubber bar, through which you insert the cable, and connect it to the alarm terminal on the PCB.

4.Connect and arrange the necessary cables (power, video, etc) lest that they should be damaged or caught while installing the camera. Then, install the camera assembly in the reverse order of the disassembly.

5.Refer to “Adjusting the monitoring direction for the camera” to adjust the lens in a desired direction. (page 38)

6.Close the top cover.

● INSTALLATION & CONNECTION

English _33