4.4.2 Alarm-Event Settings
This section covers notifications due to internal system event warnings.
Figure 4-10 Alarm – Event Settings
Event: Select from the following event types.
SD Card Full: If SD card capacity is full, DVR will create a SD Card Full Event.
SD Card Missing: If SD card is missing, DVR will create a SD Card Missing Event.
Power Loss: If power is disconnected, an alarm event will be triggered when power is restored.
Network Loss: If connection to the local network is lost, DVR will create a Network Loss event.
NOTE: This function only checks the physical connection (link) to the network. Any network behavior that blocks data connectivity (blocked ports, IP addressing errors, etc.) is not detected by this function.
GPS Loss: If the GPS signal is lost, the DVR will create a GPS Loss event.
Click 
button to return to the previous level of menu.
SD Card Full:
Figure 4-11 Alarm – Event – SD Card Full
30
