67
5.8 Direct High Speed Modem Connection
Straight Through Ethernet Cable Pin outs:
The Figure below shows the pin configurations for a straight cable.
Connection Procedure:
The first step is to purchase or make a straight through cable. We recommend purchasing one if you have
never made a straight through cable. Please remember you can not use a cross-over network cable for
this application
Once you have a straight through cable plug one end into the LAN port on the back of the recorder and
the other into the high speed modem.
Log into the EverFocus DVR menu and go to the Network Setting Menu.
Input the Static IP address, the Subnet Mask, and the Gateway that you obtained from the internet
service provider.