3
Event Alarm
SD card error, SD card temperature, SD card Full, SD card missing, Power Loss,
Network Loss, GPS loss, GPS speed, GPS fencing
Email alert
Multiple email notifications in response to alarms and events. (Requires real time
network connectivity though cellular device).
GPS Function
Embedded GPS Sensor(
optional external GPS antenna required
) for speed and
geographic limit alarms (rectangular or circular fencing)
Configuration Method
On screen menu with ‘portable monitor friendly’ graphical user interface
Control/Setup
IR remote control, USB mouse, network I/F
Real time clock
Can be synchronized to GPS/NTP time source; flexible DST settings
Watchdog Function
Reboots DVR automatically if required
Networking
RJ45 socket, 10/100Mbps
TCP
-
IP/DHCP/PPPoE/DDNS/SMTP/SSL/POP3/HTTP/NTP
Interface
RS-232, USB 2.0
Power Source
13.8/27.6VDC nominal; 10V~36VDC range (Built in surge protection, voltage
regulation, programmable Delay On/Off relative to ignition or other switched
voltage)
Dimensions
117 x 63 x 38.4mm / 4.6”x 2.5”x 1.5”
Weight
300g / 0.66lbs.
Operating Temp.
Working Temperature: -10 ~55 ; 14 ºF ~131 ºF
Storage Temperature: -40 ~85 ; -40 ºF~185 ºF
1.4 FRONT PANEL
Your primary interaction with your new DVR will be through the Front Panel buttons and their corresponding
buttons on the included IR Remote Control. Take a moment to learn where the keys are as the remainder of the
manual will refer to them often.
Figure 1-1 Front Panel