5.7 Simple One to One Connection

Crossover Ethernet Cable Pin outs:

The Figure below shows the pin configurations for a cross-over cable.

Connection Procedure:

￿The First step is to purchase or make a cross-over cable. We recommend purchasing one if you have never made a cross-over cable. Please remember you can not use a straight through network cable for this application

￿Once you have a cross-over cable plug one end into the LAN port on the back of the DVR and the other into the network card on the back of the computer.

￿Log into the EverFocus DVR menu and go to the Network Setting Menu.

￿You must use the Static IP option for this type of connection.

￿Assign an IP of 192.168.001.003, a Subnet Mask of 255.255.255.000, and a Gateway of 192.168.001.001. You can ignore DNS Server.

64

Page 71
Image 71
EverFocus EMV200 user manual Simple One to One Connection