Samsung SNB-7002, SNV-7082 Installation, Hold down the lock lever in the outer direction as shown

3. Hold down the lock lever in the outer direction as shown	Camera Body
and turn the camera body in the <UNLOCK> direction
(counter clockwise) to remove the bracket from the
body.
 If it fails, take the bottom hole of the bracket and turn the
bracket in the <LOCK> direction (clockwise) to remove it.
	Bracket

Installation

1.Use the provided screws (x3) to fix the bracket to a desired position on the ceiling or

wall.

 Ensure that the <CAMERA FRONT> label on the

bracket faces the direction for camera monitoring.
2. Arrange the cables through the bracket to
the ceiling or wall.
 If you drill a hole in the ceiling cover for wiring, press
hard to remove the cover and attach the dust-proof
plate to it, and arrange the cables through the plate.
If you intend to arrange the cables without drilling a	Wiring Cover
hole, use the empty area opposite to the <CAMERA
FRONT> label side for the wiring purpose.

3.Mount the camera body onto the bracket.

Align the marking hole of the camera body with the <CAMERA FRONT> label of the bracket, and turn the body in the <LOCK> direction.

4.Assemble the camera module to the body.

5.Refer to “Adjusting the monitoring direction for the camera” to adjust the lens in a desired

direction. (page 38)
6. Close the top cover.	UNLOCK

Fit the top cover into the fixing tips of the camera body and turn the cover clockwise.

● INSTALLATION & CONNECTION

English _31