Samsung SND-7082F, SNV-7082, SNB-7002 user manual Setup screen

setup screen

•Dwell time : This is the time while each applicable lighting condition is kept in order to enable the switch between day and night modes.

•Duration : Specify the time interval of lighting at which the sequence operation is triggered.

•Simple focus after D/N : When switching day/night mode, automatically runs focus adjustment.

When using IR lens with the camera, set this to <Off>.

M Setting <Simple focus after D/N> option may cause false focus adjustment under a specific condition. For further details, refer to “Focus setup”. (Page 89)

•Sharpness mode : Adjust the overall sharpness of the image. If selecting <On>, you can adjust the sharpness of the image.

•Sharpness level : The higher the level is, the sharper and clearer the outline of the image becomes.

•Gamma : Adjust the contrast of the image.

•Color level : Adjust the color level of the image.

•Alarm in : Set the image to Color or B/W depending on the Open/Close state of the alarm sensor.

If the Day & Night mode is set to Externel B/W, the alarm-in function of the event-alarm input page will be disabled.

Special Setup (SND-7082/SND-7082F/SNV-7082)

1.Select <Special>.

2.Select each item and set it properly.

•Day & night : You can switch the mode to adjust the black and white level as well as the colors.

-Color : Always displays the video in colors.

-B/W : Always displays the video in black and white.

-Auto : Displays in color mode

during normal daytime and switches to black and white mode in a low contrast scene at night.

If you set the AGC mode to <Off> from <Exposure>, the AUTO DAY/NIGHT mode will be disabled accordingly.

-External B/W : Control the image modes of Color and B/W when an external IR is synchronized via the Alarm In port.

86_ setup screen